Your first reading in Piso
In this walkthrough you capture a real reading, for example a forklift’s hour meter, from start to finish. The reading ends up in Zap, the foundry’s system, without anyone typing it again.
1. Sign in
Section titled “1. Sign in”-
On the plant tablet, open
piso.tpu.mx. -
Type your Número de operador (Operator number).
-
Tap Ingresar con rostro (Sign in with face) and look at the camera. If you prefer, or if it does not recognize you, tap Usar NIP (Use PIN) and type your PIN.
2. Capture the reading
Section titled “2. Capture the reading”The home screen shows three options: Gas natural (colada), Horómetro montacargas and Cambio de tanque LP (natural gas per heat, forklift hour meter and LP tank change).
-
Tap Horómetro montacargas.
-
Pick the Activo (Asset): the forklift you are going to read.
-
Take the photo of the hour meter. The AI reads the value and types it for you in Horas acumuladas (Accumulated hours).
-
Compare the value with what you see on the meter. If it does not match, correct it: you have the final say.
-
Tap Guardar lectura (Save reading).
If there is signal, you see Enviado a Zap (Sent to Zap). Done.
3. What data each reading asks for
Section titled “3. What data each reading asks for”| Reading | Data |
|---|---|
| Gas natural (colada) | Totalizador (Totalizer, m³) and, if you have it, Caudal (Flow rate, m³/h). |
| Horómetro montacargas | Horas acumuladas (h). |
| Cambio de tanque LP | Nivel nuevo and Nivel anterior (New and Previous level, %), Proveedor (Supplier), No. de serie nuevo (New serial number) and Observaciones (Notes). |
In all three you pick the Activo first, and the photo helps fill in the main value.
4. Nothing is lost without signal
Section titled “4. Nothing is lost without signal”If the network goes down, Piso saves the reading on the device and shows Guardado sin conexión — se enviará al reconectar (Saved offline — it will be sent when you reconnect). On the home screen you see how many capturas pendientes de sincronizar (captures pending sync) there are. When the signal comes back, they are sent on their own and the number drops to zero.