See an alloy's chemistry over time
This guide tells you where to see how an alloy’s chemistry has behaved over time. Anyone with access to ARL Lab can open all three pages.
Which page to open
Section titled “Which page to open”| What you are looking for | Page | Menu |
|---|---|---|
| All the heats of an alloy, one after another, with their capability and their control chart | Resultados por aleación (Results by alloy) | Análisis (Analysis) |
| Whether an alloy for a customer is drifting, has little margin or can hold its range | Comparar coladas (Compare heats) | Herramientas (Tools) |
| How the lab is doing: bad burns, standardizations, incidents and consumables | Tendencias (Trends) | Herramientas |
See an alloy in Resultados por aleación
Section titled “See an alloy in Resultados por aleación”-
Open Resultados por aleación, in the Análisis menu.
-
Choose the Aleación (Alloy). The list says how many heats each one has, and the change applies at once. On entry, the page opens the alloy with the most heats.
-
To narrow it down, fill in the filters and press Aplicar (Apply). Quitar filtros (Remove filters) clears them.
-
Read the line at the top: it says how many heats came in and from which date to which, oldest to newest.
| Filter | What it does |
|---|---|
| Desde (From) and Hasta (To) | The period. If you leave Desde empty, the portal takes 365 days before Hasta. |
| Cliente (Customer) | Type the customer; the field suggests names. |
| Producto (Product) | Turns off if the portal cannot read the products; a note explains it. |
| Horno (Furnace) | The furnace number. |
| Veredicto (Verdict) | Todos (All), Verde (Green), Ámbar (Amber), Rojo (Red), Provisional (falta confirmar) (Provisional, to be confirmed) or Sin liberación (No release). |
The filters stay in the page’s address: if you copy the link, someone else sees the same thing.
If the period has too many heats, the page warns you: «Se muestran las N coladas más recientes de T; acote las fechas para ver las demás.» (The N most recent heats out of T are shown; narrow the dates to see the rest.) With the Veredicto filter it can also warn that only the most recent heats in the period were checked. In both cases, shorten the dates.
Exportar a Excel (Export to Excel) only appears to people authorized to download the file, and is not offered if the Producto filter could not be applied.
Read what the page shows
Section titled “Read what the page shows”Capability by element
Section titled “Capability by element”For each element and each version of the specification: Rango del cliente (Customer range), n, Media (Mean), Desv. est. (Std. dev.), Cpk and Ppk.
It is calculated against the customer’s range and only with the release readings. Provisional ones (the sample is yet to be confirmed), those from invalidated analyses and those from an alloy under review are left out. With fewer than 25 heats no number is given: the table says n insuficiente (n insufficient).
Control chart
Section titled “Control chart”-
In Elemento (Element), choose the element you want to see.
-
Read the chart: each point is a heat, in the table’s order.
-
Press a point to go to its row in the table. Ver datos (See data) shows its numbers in a table.
| On the chart | What it is |
|---|---|
| Filled point | Release reading |
| Hollow point | Provisional or excluded: it does not enter the calculation |
| Solid line | Customer range |
| Dotted line | Internal range |
| Mean and control limits | The mean and the mean ± 3σ of the readings that enter the calculation |
Sample quality and porosity
Section titled “Sample quality and porosity”This section summarizes, per heat, the review of its burns and its latest porosity analysis.
Heat by heat
Section titled “Heat by heat”The table has one row per heat: Colada (Heat), Fecha (Date), Horno, Cliente, Aleación, Veredicto, Producto, Calidad de muestra (Sample quality), Porosidad (Porosity), each element and T °C. The number takes you to the heat and ▸ opens its subsamples. Ver todo (Expand all) and Contraer todo (Collapse all) open or close them all.
| Mark on the element | What it means |
|---|---|
| ● | Within the internal range |
| ▲ amber | Within the customer’s, outside the internal one: it is an internal warning |
| ✕ red | Outside the customer’s range: a quality rejection |
| No mark | The element has no range |
Each heat is judged against the version of the specification valid that day, which is why the table comes in blocks by version. If no specification covers the day of some heats, the block says there is no per-element traffic light.
Compare an alloy’s heats
Section titled “Compare an alloy’s heats”Open Comparar coladas, in the Herramientas menu, and choose the tab. Invalidated samples do not enter the calculations.
| Tab | What it answers | What it asks for |
|---|---|---|
| Homogeneidad liberación → final (Homogeneity, release → final) | How much each element changes from the release sample to the final one | The alloy and Buscar (Search) |
| Margen contra spec (Margin against spec) | How far each alloy is from its limit: 0 is on the limit or outside, and higher is more margin | The alloy, the customer and Buscar |
| Deriva por elemento (Drift by element) | Whether an element is drifting, on a chart of the release sample | The alloy and the customer, both, and Buscar |
| Capacidad de proceso (Process capability) | Whether the process can hold the range, with Cp and Cpk of the release samples | The alloy and the customer, both, and Buscar |
| Comparador de coladas (Heat comparer) | Where some heats of the same alloy differ | The heat numbers and Comparar (Compare) |
In Capacidad de proceso, the worst comes out on top. An element with no range in the specification shows sin corredor (no corridor): it does not mean the process is not capable.
This guide does not cover the Otros laboratorios (Other labs), Sesgos entre laboratorios (Biases between labs) and De inicial a final (From initial to final) tabs.
Use the comparer
Section titled “Use the comparer”-
Open a heat in Coladas (Heats) and press Comparar coladas →. The comparer opens with that heat already selected.
-
In Números de colada (separados por coma) (Heat numbers, comma-separated) type the numbers of up to 10 heats of the same alloy, for example
1201, 1202, 1205. Press Comparar.If two heats share a number, the page asks which one you want: choose yours by its alloy, its origin and its date. If a number does not exist, it asks you to check it.
-
Read the table: the columns are sorted by spread, so what sets those heats apart most comes first. The color says whether it is in or out of range; ↓ marks the lowest and ↑ the highest.
What Tendencias does tell you
Section titled “What Tendencias does tell you”Tendencias shows lab indicators for 7 d, 30 d or 90 d; it opens on 30 days. The first three are compared against the previous period. Incidentes abiertos (Open incidents) and Consumibles bajo mínimo (Consumables below minimum) are today’s counts, with no comparison.
| Indicator | |
|---|---|
| Quemas sin chispa (Burns without a spark) and Quemas malas (Bad burns) | Percentage of the period |
| Estandarizaciones (Standardizations) | How many there were in the period |
| Incidentes abiertos and Consumibles bajo mínimo | How many there are today |
Its Gráficas de control por elemento (Control charts by element) use the readings noted in the burn log: they are not the heats’ official chemistry and do not carry the specification’s limits. They only appear with at least 2 readings with chemistry in the period.
See also
Section titled “See also”- See the analyzed heats and reprint a report: which page to open for each heat.
- Review a heat’s chemistry: read its verdict step by step.
- ARL Lab: every ARL Lab guide.